Fixed Format Mixer

Dual Format DJ mixer

The features and layout of the FF-6000 were determined in collaboration with leading loudspeaker manufacturers Funktion One, who canvassed many DJs world wide on their requirements.

The result is a mixer which is not only of the highest sound quality, as you would expect from Formula Sound, but also incorporates the features and layout which DJs have asked for.

General

• A removable fader panel allows the mixer to be easily configured as a linear fader or a rotary fader mixer.
• All faders plug in and can therefore be changed easily should the need arise.
• All switches are illuminated to show system status clearly. 2 push button types have been utilised to ease recognition of frequently used switches. Knob sizes and control spacing has been maximised.

Channel Features

• 6 Channels.
• 1 & 2 are switchable to Mic - Line, (mic inputs Lo Z balanced).
• Channels 3 - 6 are switchable to either phono - line or line - line. All inputs have rear panel gain trims to set individual levels.

Channels 3 - 6 have a concealed switch to select phono or line input.

Front Panel Controls

Optional rotary fader panel.

• 1 Illuminated input select push switch with adjacent led indicator.
• 1 Gain pot with adjacent clip indicator and 5 segment led meter indicating signal presence.
• 3 band E.Q. featuring +6 dB boost and -25dB cut at HF 10kHz, Mid 1kHz & Bass 100Hz
• Full routing to crossfader A -B or direct to master from all channels. Illuminated push buttons.
• Cue switch.
• Rotary or Linear faders on removable panel along with 45mm VCA controlled crossfader.

Master Section

• Very comprehensive effects routing and mixing facilities
• Features 2 effects loops A & B with wet/dry mixing controls, punch or latching push switches.
• Loop Swap facility. Mono switch and bal/pan control.
• Send and return gain trims to allow correct level matching into any outboard effects processors.
• Cue switch allows checking of the desired effect before selection.
• 1 switchable insert on the main outputs.

Outputs

• Master output available in stereo and mono on XLR connectors (balanced)
• Zone output available in stereo and mono on XLR connectors (balanced)
• Booth Monitors output switchable to mono on XLR connectors (balanced)
• Record outputs are provided on phono connectors.

Console Mic.

An input for a separate console microphone (XLR connector Lo Z Balanced) is fitted. This signal is routed to the zone and master outputs but it is not present in the booth outputs. 2 band E.Q. Cue & Mic ON switch also fitted.

Monitoring

Phones outputs are provided on 3.5mm and standard 6.5mm jack sockets driven by a powerful headphone amplifier.

Split cue switch and cue mixing control are also featured.

2 x 12 segment stereo led meters are fitted to visually monitor Cue and output signals.

Construction

Steel Front panel with a rear printed polycarbonate overlay guarantees that the mixer will still look good in years to come.

Our 30+ years of pro-audio manufacturing ensures that the highest performance audio quality, build quality and reliability is assured.